Biodegradable Die Cut Handle Bags Manufacturers, Suppliers, Factory

1. Brief Introduction

(1) Product Description

Bags with a carrying opening die cut directly through the upper film instead of an attached loop handle
Made from PBAT PLA or corn starch based bioplastic resin instead of standard polyethylene
Designed to decompose in wet soil within 6 to 12 months while keeping the strength and feel of a normal plastic bag

(2) Applicable Scenarios & Target Audience

Channel Type	Applicable Scenario	Target Audience
Foodservice	Restaurant and food delivery takeout for hot or oily food	Restaurants and food delivery brands
Grocery & Retail	In-store checkout and daily grocery carry	Retailers and supermarket chains
Healthcare	Pharmacy bags for retail health outlets	Pharmacies and drugstore chains
Events & Promotions	Trade show and event giveaways	Event organizers and promotional brands

(3) Handle & Construction Design

Handle opening is punched directly through the film rather than attached as a separate loop
Handle performance depends on film formulation thickness aperture geometry bag construction and load
Reinforcement or a handle patch is available and tested for higher load requirements

(4) Material & Environmental Compliance

Manufactured with PLA PBAT and corn starch based bioplastic resin backed by compliant test reports
Bags decompose in wet soil within 6 to 12 months instead of remaining in landfills for centuries
Certification such as EN13432 and ASTM D6400 should be confirmed against the destination market before ordering

(5) Performance Verification & Documentation

Sample testing checks seal strength and handle tear resistance under the intended load and product type
Landed cost depends on material blend size print complexity and freight rather than unit price alone
Buyers should request verified test data against their weight target before committing to a bulk order

Biodegradable Die Cut Handle Bags

2. Basic Specifications

Bag dimensions, film thickness, and handle aperture should be specified together rather than compared on unit price alone, since handle performance depends on the film formulation, thickness, aperture geometry, bag construction, and load rather than any single factor. Standard and heavy-duty thickness grades are offered to match different load targets, and both bag size and film gauge remain fully customizable. Carton packing quantities are adjustable by size and thickness and are used for calculating volumetric weight, so the specifications below should be treated as a starting reference to be confirmed against the intended use.

Item	Specification	Remarks
Size (L x W)	9 x 12" (22.86 x 30.48cm) 12 x 15" (30.48 x 38.1cm) 15 x 18" (38.1 x 45.72cm)	Custom sizes available
Handle Type	Die-cut handle punched through the upper film	Reinforced handle patch available on request
Film Color	Clear White Black or Custom	Custom Pantone colors available
Thickness	Standard: 0.6-1.2 mil (15-30 microns) Heavy-duty: 1.2-2.0 mil (30-50 microns)	Thickness customizable; heavy-duty grade improves load capacity and tear resistance
Qty per Carton	500 pcs/box x 2 boxes/carton = 1,000 pcs/carton 250 pcs/box x 4 boxes/carton = 1,000 pcs/carton	Packaging quantity adjustable by size and thickness; used for calculating volumetric weight

3. Material & Environmental Attributes

These bags are manufactured using PLA, PBAT, and corn starch-based bioplastic resins rather than standard polyethylene, which allows them to naturally decompose in wet soil within 6 to 12 months instead of persisting in landfills for centuries while still keeping the strength, flexibility, and water resistance of a normal plastic bag. A standard polyethylene option remains available as a secondary lower-cost alternative where biodegradability is not required. Because rules on banned materials, thickness limits, labeling, and required certification vary by country, state, or city, buyers should confirm which certification, such as EN13432 or ASTM D6400, and which supporting test reports apply to their destination market rather than relying on a general biodegradable label alone. All materials are BPA-free, and compliance documentation such as FDA, LFGB, REACH, or RoHS can be provided according to the target market, with compostable-grade material also available on request.

Item	Specification	Remarks
Raw Material	• PLA PBAT and corn starch based bioplastic resin (primary direction) • Standard polyethylene HDPE or LDPE (secondary lower-cost option)	Material choice affects disposal claim and cost
Recycled Content	Standard product uses virgin bioplastic resin; custom post-consumer recycled content (PCR) ratio available on the polyethylene option	If recycled content is required please confirm ratio and certification in advance
Eco Attribute	• Biodegradable - decomposes in wet soil within 6 to 12 months • Certified to ASTM D6400 / EN13432 upon confirmation of target market	Certification and test reports provided per destination market; cost and lead time confirmed separately
Note: All are BPA-free, and relevant compliance documentation (FDA, LFGB, REACH, RoHS, etc.) can be provided based on the target market. Compostable material is also available on request.

4. Product Physical Properties

Film performance depends on gauge, tolerance, seal strength, and handle-tear resistance under the actual load target rather than resin type alone, so buyers should request test data or samples verified against their intended weight and product type, whether dry, wet, or oily, before placing an order. The figures below are factory lab reference values measured on a PBAT/PLA blend film and illustrate typical tensile, elongation, impact, and seam performance for this product line. Actual performance can be adjusted to meet specific customer requirements, and the data is provided for reference only, with certified test reports available upon request.

Physical Properties (Factory Lab Test Records) Test data based on 40 micron (1.5 mil) PBAT/PLA blend film. Actual performance can be adjusted per customer requirements (Data for reference only; certified test reports available upon request).
Tensile Strength (N)		Tensile Strength at Break (MPa)		Elongation at Break (%)		Impact (G)	Seam Strength (N)
TD	MD	TD	MD	TD Target	MD Target	Value	Value
8.5	11.2	20.5	24.8	420	480	55	12.5

5. Materials and Safety Certifications

Item	Details
Key Attributes	BPA-Free/Eco Attribute
Relevant Compliance Certifications	FDA: FEI No. 3004496839 BRC-PM (Huakang BRC-PM Certificate): Certificate No. 0196051
Other Certifications	ISO 13485 — Medical Device Quality Management System ISO 9001 — General Quality Management System BSCI / SMETA / Sedex — Corporate Social Responsibility Audits (labor, environment, etc.)

6. Customization Capabilities

Item	Details
Printing	Logo + design printing supported; gravure 4-color printing process
Size Customization	Custom sizes available on request; MOQ to be discussed separately
Standard MOQ	3 tons
Custom MOQ	3 tons，plate/tooling fees: to be quoted separately
Sample Lead Time	14 business days; sample fee USD $300, refundable upon mass production order

7. Packaging & Logistics

Item	Details
Inner Packaging	Subject to specific packaging requirements
Outer Carton	Subject to specific packaging requirements
Trade Terms	FOB Port of Shanghai or Sihanoukville; T/T 30% deposit, balance against copy of B/L
Production Lead Time	45 days for first order; 30 days for subsequent orders

8. Quality Control - Combination of flowcharts and tables

Stage	Inspection Content
IQC	Plastic pellet strength, transparency, and compliance verification
IPQC	Dedicated QC inspectors stationed on the production floor with ongoing random inspections throughout the production process
OQC	Dimensions, weight, seal integrity, appearance, and packaging completeness
Customer Inspection	On-site inspection by customer or third-party testing agencies supported

9. After-Sales Service

Item	Details
Warranty Period	Quality claims accepted within 6 months of shipment (excluding damage caused by misuse or improper storage)
Claims Process	Provide photos + physical samples within 30 days of receipt; resolution provided within 7 business days
Resolution Options	Replacement / Refund / Discount credit; shipping responsibility negotiated based on circumstances (quality-related returns borne by supplier; non-quality-related returns borne by customer)

10. About Huayue Group

Huayue Group has been deeply rooted in the plastic packaging industry for over 30 years. The company operates the largest plastic packaging production base in Cambodia, with an annual capacity of 120,000 metric tons (equivalent to 10,000 metric tons per month). The company holds multiple international management system certifications (including ISO 9001, BSCI, Sedex, etc.) and produces products that comply with food-contact material standards such as FDA, LFGB, and EU 10/2011.

Over 70% of Huayue's products are exported to European and North American markets, where we have established long-term, stable partnerships with many leading Western retailers. We support full customization in sizes, thicknesses, multi-color printing, and eco-friendly materials (compostable/biodegradable). Backed by 30 years of manufacturing experience, large-scale production capacity, and rigorous quality control, we provide reliable packaging solutions for food companies worldwide.