【Remaining 9】 Square Case for Keyball39, Black

**Special Offer: 10% off for the first 10 sets!**

Regular price: ¥6,500
Special price: ¥5,850

We would appreciate it if you could share your experience with us after purchase, either through a message or on X (not mandatory).

⬜️ **Features**

This is a square-shaped case designed for Keyball39 using a 3D printer.
It features a flat and minimalist design with a streamlined shape.

The thumb key area is designed for low-profile keys and is optimized for use with a 1.5mm thick Poloron sheet, although it can be used without the sheet.

The Poloron sheet we use is:
INOAC Corporation Poloron Sponge Roll 1.5t x 100mm
You should be able to find it by searching on Amazon.

While currently designed for the 25mm trackball case EN・KAKU, it is compatible with cases with a trackball case width of around 26mm.
* You may need to shave down the case in some cases.

* This is for the right trackball.
* Regular 34mm trackballs are not compatible.
* Currently only available in black.
* We will add more colors if there is enough demand (planned colors are white and gray). Please leave a comment like I want white if you have a color preference.

⬜️ **Set Contents**

* Left and right case set
* Grip Plus x 8 (pre-cut)
* Screws for mounting the board are not included, please use the original screws.

⬜️ **What You Need**

* Keyball body and bottom screws
* Poloron sheet (optional)

⬜️ **Color (Filament Used)**

Bambu Lab PLA Matte
* Black... Matte Charcoal (sales name)

⬜️ **Before Purchase**

* Please note that shipping may take 2-3 days.
* While we strive for the best print quality, please understand that 3D prints may have layer lines and surface roughness.
* Support material marks may be visible in screw holes and cable windows to prevent print deformation.
* Trackball and trackball case are not included.
* Shipping via Yu-Packet Post.
* Price negotiation is not accepted.